EasySync S1-A-7001 Betriebsanweisung PDF herunterladen (Seite 17)

Document Reference No.: ES_000008

S1-A-7001 RS232 to 1-Port CANbus Adapter User Guide

Version 1.2

Clearance No.: ES #03

4.1.8 Enable Time Stamp (Z)

Summary

Sets or clears time stamp on received frames. This value is persistent in EEPROM across reset or

restart. Four (4) bytes are added to the end of a received frame. This value is a rolling 16-bit

counter that increments once every millisecond and rolls over at 60,000mS (1 minute). Valid hex

values are 0x0000 through 0xEA5F.

NOTE: The CAN channel will revert to its prior state after execution. For example if the channel

is Open when this command is executed, the channel will update the setting and return to the

Open state.

Definition

Zn<CR>

Parameters

n = 0 = disable time stamp feature

1 = enable time stamp feature

Remarks

Default is OFF (disable time stamp)

Only use when required to change functionality.

Example:

Z1<CR>

Enable time stamp.

Return Codes

<CR> = OK

<BELL> = ERROR

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 38 39

Keine Kommentare

EasySync S1-A-7001 Betriebsanweisung Seite 17